PET Air Compressor
Why Should We Choose Screw Type Compressor
30~40bar Air Compressor:
Screw VS Piston
| Comparison | Oil free Screw Air Compressor | Oil free Piston Air Compressor |
|---|---|---|
| Air quality | 100% Oil-free | Air cylinder Oil-free, Crankcase has oil |
| Compression Method | 2 Stage Screw | 3 Stage Piston |
| Lubricating Medium | Pure Water | None |
| Temperature | Low: < 55℃, No need for cooling | High: 125~200℃, After cooling about 60℃ |
| Cooling Method | Air Cooled or Water Cooled (Only one cooler for lubricating water) | Water Cooled (Two interstage cooler and one aftercooler for compressed air) |
| Rotate Speed | 3000 r/min Ideal Speed | 600~900 r/min Low Speed |
| Vibration and Noise | Balance and Simple structure, low vibration, and less noise | The pistons rise and fall or move back and forth causing too much vibration and Noise |
| Costs – Purchasing | More | Less |
| Costs – Foundation | No costs | Require foundation and grouting due to high unbalanced forces & high vibration. |
| Costs – Maintenance | Only Air filter elements and Water filter elements | High wear & tear of moving parts like piston rings, valves, etc. |
| Costs – Energy (e.g. 40bar 10m3/min) | Motor Power: 112kW (1st stage 75kW+2nd stage 37kW) | Motor Power: 132kW |
| Capacity Loss | There is no loss / very minor loss in Capacity over a period. | There is De-ration in Capacity due to wear and tear in cylinder crank case, piston rings, pistons and valves. |
Screw Air Compressor Parameters
High-pressure 30~40bar PET Screw Air Compressor
| Model | Pressure | Capacity | Power | Noise | Dimension(mm) | Weight |
|---|---|---|---|---|---|---|
| OGWBE60F(S) | 30 bar | 6 m³/min | 37+22kW | 70dB | 3000×1400×1700 2900×1400×1700 | 2000kg |
| OGWBE90F(S) | 30 bar | 10m³/min | 55+37kW | 73dB | 3600×1750×2000 3500×1500×1730 | 3000kg 2300kg |
| OGWBE120F(S) | 30 bar | 13m³/min | 75+45kW | 75dB | 4000×1750×2000 3500×1500×1730 | 3500kg 2950kg |
| OGWBE155S | 30 bar | 16m³/min | 90+65kW | 77dB | 4000×1700×1800 | 3500kg |
| OGWBE185S | 30 bar | 20m³/min | 110+75kW | 78dB | 4000×1700×1800 | 4000kg |
| Model | Pressure | Capacity | Power | Noise | Dimension(mm) | Weight |
|---|---|---|---|---|---|---|
| OGWBE75F(S) | 40 bar | 6 m³/min | 45+30kW | 70dB | 3000×1400×1700 2900×1400×1700 | 2100kg |
| OGWBE120F(S) | 40 bar | 10m³/min | 75+45kW | 73dB | 4000×1750×2000 3500×1500×1730 | 3000kg 2400kg |
| OGWBE145S | 40 bar | 13m³/min | 90+55kW | 75dB | 3500×1500×1730 | 3000kg |
| OGWBE185S | 40 bar | 16m³/min | 110+75kW | 77dB | 4000×1700×1800 | 3500kg |
| OGWBE220S | 40 bar | 20m³/min | 132+90kW | 78dB | 4000×1700×1800 | 4000kg |
Send Us An Email
Typical Applications for PET Air Compressor
As we know, PET(polyethylene terephthalate) is a safe and recyclable packaging material. Compared with aluminum cans and glass bottles, PET containers are more environmentally friendly and cost-effective.
Air compressors are the main utility for plastic processing plants, A large amount of compressed air is needed to blow PET or PP preforms into bottles.
|
Applications |
Details |
|---|---|
| PET Bottle blowing | High-pressure compressed air is used for blowing bottles.
The pressure depends on the container’s design, wall thickness, blow speed, and so on. The bottles with thick walls, sharp edges, and special shapes need higher pressure. Generally, the stretch blow molding requires about 10~25bar for pre-blowing and about 40bar for the bottle-blowing process. The trend for PET bottle-blowing machines is to reduce the blow pressure as much as possible for energy saving. |
| Cleaning | The bottles should be cleaned with compressed air before filling the water, beverage, cooking oil and so on.
If the air is contaminated, it will influence the flavor and odor, causing health problems. |
| Filling | Oil-free compressed air should be used in filling machines for liquid preparations. |
| Packing and labeling | Low-pressure compressed air is also used for automated lines for packaging, labeling, and more. |
| Instrumentation | For pneumatic conveying during the manufacturing process.
For the control valves, sorting, polishing, and more. |
Development for PET Air Compressor
High-Pressure Compressor solutions for PET bottle-blowing machines are as follows:
| Comparison | Small Oil-lubricated Piston | Oil-free Piston | Booster | Oil-free SCREW |
|---|---|---|---|---|
| Photo |  |
 |
 |
 |
| Lubricate method | Oil-lubricated | Oil-free (Class 1) | Oil-free (Class 1) | 100% Oil-free (Class 0) |
| Cooling method | Air-cooled | Water-cooled | Water-cooled | Air-cooled or Water-cooled |
| Compression stages | Two-stage/Three-stage piston | Three-stage piston | 1st screw 2nd piston | Two-stage SCREW |
| Space for 40bar 6m3/min | 3800*1000*1700mm 2800kg | 3100*1750*2150mm 3400kg | 2790*1500*1470mm 3200kg | 2900*1400*1700mm 2100kg |
| Comparison | Piston type | Screw type |
|---|---|---|
| Working principle | For piston compressors, the air is compressed in different cylinders and cooled. For example, the atmospheric air is compressed to 4~5bar in the first cylinder, then cooled before pushing to the second cylinder, achieving 15~17bar then, the air is cooled again and reaches 40bar finally. | For screw type, the air is compressed to 7~8bar at the first screw compression stage, there is no need to cool and the air goes into the second stage screw air end, finally achieving 30~40bar air discharge directly without cooling. |
| Efficiency | Low-speed 600-1500r/min, more friction pairs, lower efficiency High temperature：Energy lost due to hot air discharge Shorter lifetime of the component |
Rotation speed 3000r/min, zero loads About 50℃, no heat waste Ideal isothermal compression |
| Maintenance | Complex structure needs special technical support for installation High maintenance costs if routine checks are not done at 4000~6000 hours |
Simple and balanced structure 50000h lifetime, Less than $500/year |
Send Us An Email
Quality Requirements for PET Air Compressor
Generally, the compressed air should be purified of contaminants before use. General contaminants are solid particulates, water vapor, and moisture, oil vapors. Which are in the atmospheric air, the lubricating oil for oil-injected type air compressors, the pipes, storage air tank, and distribution.
When the PET compressed air has a direct connection with drinking water or beverage, cooking oil, we must ensure purity and cleanliness to prevent contamination. For the details what we should do are as follows:
Remove the moisture
As we know, moisture is good for microorganisms and fungus growth. If there is moisture inside the pipes of the compressed air, it is easy to be blown to the products or the packaging or containers. So we need to use dryers to ensure the required dew point. Generally, for the direct contact compressed air, the dew point should be -40℃ and use a desiccant air dryer, and for low-risk non-contact compressed air, the dew point can be 3℃ and use a refrigeration air dryer.
Remove the oil
The oil exists in the atmospheric air, so even you choose a 100% oil-free type air compressor, there is still oil vapor in the compressed air, so the filters should be used.
Generally, for direct contact compressed air, use an oil-free type air compressor is a must. Ensures Class 0 100% oil-free compressed air with high purity, eliminates the health risk of rejection risk associated with oil contamination. For low-risk non-contact compressed air, we can use an oil-lubricated type air compressor which is more economical, but it’s better to use filters to ensure the oil content 0.003ppm.
Remove the particles
The atmospheric air includes solid particulates or dust that may cause contamination if contact with the products. Other contaminants may come from internal mechanisms of the air compressor system. We also need to use filters to ensure the particle content is no more than 0.01μm.
Common Equipment for the Pharmaceutical/Medical Applications
- For the direct contact compressed air for production line, we suggest using 100% Oil-free type air compressor with the desiccant air dryer and filters, the materials should be used is food-grade stainless steel.
- For the non-contact low-risk compressed air for production line, if with a limited budget, the oil-lubricated type air compressor with refrigeration air dryer and filters can be chosen, but for long term consideration, an oil-free type air compressor can not only produce high-quality oil-free and clean air but also costs lower for maintenance and energy.
Related Products
Send Us An Email
100% OIL-FREE
More than 20 years experiences in Water-lubricated Oil-free technology
Germany Rhineland TUV Class 0 Oil-free Certification
RELIABLE
More than 30 years Single Screw Technology
Most balance and reliable structure
Low temperature(< 55℃) reduces the stress on components
LOWER MAINTENANCE
Without Oil Air Separation Unit
Consumable parts are only air and water filter elements
$100~$300/year
ENERGY SAVING>30%
Ideal isothermal compression and no heat waste(<55℃)
Most Advanced VSD and Two-stage compression technology
SUPER QUIET
Super dynamic balanced system
The motor and screw are directly connected
Sound absorbing materials are also used in the shell
AIR END
Optimal profile
Double stage energy saving more than 10% than single stage.
PM MOTOR
Direct Drive
Class 1 PM motor, Power factor: >95%, Oil-cooled type can be customized
VSD CONTROL
Automatic operation
Dynamic display all operation parameters, prevent accidents by the alarm.
EASY-MAINTENANCE
Patent technologies
Filters can be easy replaced in half an hour. Oil can be completely replaced.
OIL SYSTEM
Minimum pressure drop
Patent oil storage device can guarantee the oil supply of the air end after a long shutdown.
How to choose the right air compressor?
Screw VS Piston Air Compressor
In recent years, screw air compressors have gradually replaced piston type air compressors. They become the mainstream
What Compressor Size do I Need?
An appropriate selection is beneficial to both the end-user and the compressor equipment. A too-large selection is
Some questions to ask yourself before buying an air compressor
For buying an air compressor, how to choose the right one for your industry? you should ask yourself
The relationship between air compressor pressure, flow and power
With constant power, when the rotation speed changes, the flow and pressure also change.
Should I choose the VSD air compressor?
The VSD(Variable Speed Drive) air compressor uses the variable frequency inverter compared with the regular Fixed speed
What Cooling method should I choose?
For most small models, it is better to use the air cooling type air compressor. There are
We replaced 21 piston type compressors with one 40bar 10cubic Screw type compressor.
No more noise, no more spare parts and high maintenance fee.
We began to use their oil free type products since 1998, the products are very reliable.
Their Water-lubricated Screw Air Compressor can ensure the 100% oil free and clean compressed air for our processing, and ensure the high quality of our products.
The oil free type screw air compressor energy saving 38.6% compared with our used air compressor, and saving 25.8% compared with the new oil lubricated type screw air compressors.
“Class 0 oil-free air compressor guarantee the best quality of our end products”
“Electrical costs and maintenance fee is significantly reduced.”