1. Open the service side door of the machine; 2. Loosen the connecting of the tube to the minimum pressure valve; 3. Loosen the pipeline on the cover of the air-oil separation tank, and ensure it can be installed correctly; 4. Loosen the fastening bolts on the air-oil separation tank; 5. Lift the cover, clean
1. Unscrew the old filter with pliers; 2. Clean the contact surface; 3. Plate a thin oil film on the surface of the new filter seal ring; 4. Tighten the new filter by hand until the gasket is sealed; 5. Check for leaks after switching on.
1. Open the air compressor door 2. Unscrew the bolt on the air filter, and take out the filter element 3. Check the condition of the air filter (replace if not good); 4. Clean the inside of the filter, and use 2-3bar compressed air to blow out the dust in the filter element from the
If we don't replace the air oil separator in time, there will be the following problems: Low separation efficiency, leading to increased consumption and operating costs, even cause big fault when the oil is not enough; The increased oil content in the compressed air outlet affects the production process After the blockage, the resistance increases,
If we don't replace the oil filter, there will be the following problems: Insufficient oil return leads to high exhaust temperature and shortens the service life of oil and oil separator; Insufficient lubrication of the air end, which shortens the life of the air end; If the filter element is damaged, the unfiltered oil containing
If we don't replace the filter element in time, there will be the following problems: The airflow will be reduced, affects production. The energy consumption increases due to the large resistance of the filter element. The actual compression ratio and the main load increases, the service life decreases. The damage of the filter element causes